華為認證ospf配置命令
- 華為認證
- 關注:2.3W次
隨著華為在中國市場的發展,華為認證也成為了IT屆的寵兒,就跟著我們一起來學習華為ospf是怎麼配置的吧.
使用的拓撲圖如下:
配置命令如下:
R1:
interface Serial0/0/0
link-protocol ppp
ip address
#
interface Serial0/0/1
link-protocol ppp
ip address
#
interface LoopBack0
ip address
#
ospf 1
area
network
network
R2:
interface Serial0/0/0
link-protocol ppp
ip address
#
interface Serial0/0/1
link-protocol ppp
ip address
#
interface LoopBack0
ip address
#
ospf 1
area
network
network
network
R3:
interface Serial0/0/0
link-protocol ppp
ip address
#
interface Serial0/0/1
link-protocol ppp
ip address
#
interface LoopBack0
ip address
#
ospf 1
area
network
network
配置命令對於學習cisco的'學員可能會有一點繞,但是敲的時候也是很有意思的.
結果如下:
R1:
[Huawei]dis ip rou
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 12 Routes : 12
Destination/Mask Proto Pre Cost Flags NextHop Interface
Direct 0 0 D LoopBack0
OSPF 10 1562 D Serial0/0/1
OSPF 10 3124 D Serial0/0/1
Direct 0 0 D InLoopBack0
Direct 0 0 D InLoopBack0
Direct 0 0 D Serial0/0/1
Direct 0 0 D Serial0/0/1
OSPF 10 3124 D Serial0/0/1
Direct 0 0 D Serial0/0/1
R1:
[Huawei]ping ip-forwarding
PING : 56 data bytes, press CTRL_C to break
Reply from : bytes=56 Sequence=1 ttl=254 time=60 ms
Reply from : bytes=56 Sequence=2 ttl=254 time=60 ms
Reply from : bytes=56 Sequence=3 ttl=254 time=30 ms
Reply from : bytes=56 Sequence=4 ttl=254 time=30 ms
Reply from : bytes=56 Sequence=5 ttl=254 time=70 ms
--- ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/50/70 ms
路由學習沒有任何問題,ping通測試也是OK的,這就是所有ospf的基本配置了.
- 文章版權屬於文章作者所有,轉載請註明 https://xuezhezhai.com/zh-tw/itrz/huawei/49vjg.html