华为认证ospf配置命令
- 华为认证
- 关注:2.3W次
随着华为在中国市场的发展,华为认证也成为了IT届的宠儿,就跟着我们一起来学习华为ospf是怎么配置的吧.
使用的拓扑图如下:
配置命令如下:
R1:
interface Serial0/0/0
link-protocol ppp
ip address
#
interface Serial0/0/1
link-protocol ppp
ip address
#
interface LoopBack0
ip address
#
ospf 1
area
network
network
R2:
interface Serial0/0/0
link-protocol ppp
ip address
#
interface Serial0/0/1
link-protocol ppp
ip address
#
interface LoopBack0
ip address
#
ospf 1
area
network
network
network
R3:
interface Serial0/0/0
link-protocol ppp
ip address
#
interface Serial0/0/1
link-protocol ppp
ip address
#
interface LoopBack0
ip address
#
ospf 1
area
network
network
配置命令对于学习cisco的'学员可能会有一点绕,但是敲的时候也是很有意思的.
结果如下:
R1:
[Huawei]dis ip rou
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 12 Routes : 12
Destination/Mask Proto Pre Cost Flags NextHop Interface
Direct 0 0 D LoopBack0
OSPF 10 1562 D Serial0/0/1
OSPF 10 3124 D Serial0/0/1
Direct 0 0 D InLoopBack0
Direct 0 0 D InLoopBack0
Direct 0 0 D Serial0/0/1
Direct 0 0 D Serial0/0/1
OSPF 10 3124 D Serial0/0/1
Direct 0 0 D Serial0/0/1
R1:
[Huawei]ping ip-forwarding
PING : 56 data bytes, press CTRL_C to break
Reply from : bytes=56 Sequence=1 ttl=254 time=60 ms
Reply from : bytes=56 Sequence=2 ttl=254 time=60 ms
Reply from : bytes=56 Sequence=3 ttl=254 time=30 ms
Reply from : bytes=56 Sequence=4 ttl=254 time=30 ms
Reply from : bytes=56 Sequence=5 ttl=254 time=70 ms
--- ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/50/70 ms
路由学习没有任何问题,ping通测试也是OK的,这就是所有ospf的基本配置了.
- 文章版权属于文章作者所有,转载请注明 https://xuezhezhai.com/zh-cn/itrz/huawei/49vjg.html